1" PVC TBH Series Ball Valve, SOC/THD Ends, FPM Seals, Z BALL

Item # TBH1100ASTV0Z00
List Price: CA$261.95

Product Description

The TBH-Z Series (Z-Ball) true union ball valves have a drilled ball to vent gases for sodium hypochlorite service. Available in PVC or CPVC materials with FPM O-rings only and PTFE seats. Sizes ½”/DN15 to 6” DN150. All valves are assembled with silicone free lubricant. Assisting users in protecting property and life, a standard integral lock-out feature secures onto the body of the valve. Actuator ready design with ISO 5211 pattern – on all sizes. Fully pressure rated for 250 PSI / PN16 at 70°F/23°C non-shock up to 2”/DN50; sizes 2-1/2” / DN65 – 4” / DN100 are pressure rated for 235psi/PN16 at 70°F non-shock. The TBH-Z is available with IPS, DIN/EN or JIS socket, threaded and flanged end connections for global use. “Patented” & Other Patents Pending” Pat. No.: 11,131,404, 11,649,899.

Certified to NSF/ANSI 61 & 372

Pipe Size
1 in
Body Material
Sealing Material
Seat Material
Valve Type
End Connection Material
End Connection Type
Operation Type
Pressure Rating
250 PSI
Cv Coefficient
Chassis Description
Standard Body

• Integral ISO 5211 Mounting Pad for Easy Actuation
• Standard Lock-Out Plate, Lock-Out / Tag-Out for up to 4 Locks
• Permanent Laser Markings, Eliminates Labels
• System friendly "Molded-In" Footpad for Skid or Panel Mount
• UV Resistant Sure Grip Ergonomic Handle
• FPM or EPDM Seals
• Double O-Ring Stem Seals
• Reversible PTFE Seats - Standard
• Easy Replacement for Existing Hayward TB-Z Series

• Pneumatic or Electric Actuators

• Stem Extensions

• Manual Limit Switch

• Coupling for Actuator

• PVC per ASTM D1784 Cell Class 12454
• CPVC per ASTM D1784 Cell Class 23447
• GFPP per ASTM D4101 Cell Class 85580 (Handle & Lock Plate)

All VENTED thermoplastic ball valves for sodium hypochlorite service in sizes 1/2" – 2” to be manufactured with PVC Type 1, Grade 1 (ASTM D1784, Cell Classification 12454) or CPVC (ASTM D1784, Cell Classification 23447). All sizes of shall be of true union design. Valve body shall have an integral top mounting flange with dimensions and bolt circles conforming to ISO 5211. Valve to include as standard a sliding lock-out plate that interlocks with integral flange on body for lock-out / tag-out, with four locations for attaching a padlock. Body shall incorporate molded in foot pad for panel or rail mounting. Valves to have a vented ball design with a vent hole drilled into one side to vent in the upstream direction. Balls must be full-port design and fully spherical on the sealing sides. Valves 2" and smaller shall have a floating ball and System2™ seat carrier design that moves with the seat to affect a double seal to flow through a closed valve, and require no adjustment. Sizes 2-1/2” through 6” shall have energized PTFE seats with backing O-ring as standard. All seats for shall be reversible to allow field rebuild. All o-rings shall be FPM only. Valves shall have a black color tee handle only for all vented ball valves for easy identification when installed. The handle shall be retained without any metal fasteners and made from black GFPP with UV Inhibitor. Stem shall contain double o-rings, and shall be blowout-proof design. Valve stem shall be designed to shear above the top stem o-ring groove, retaining the pressure retaining integrity of the valve in the unlikely event of a stem torsion failure. All 1/4" - 2" ball valves shall be pressure-rated for 250 PSI at 70°F non-shock. Sizes 2-1/2” – 4” valves shall be pressure rated for 235psi at 70°F non-shock. All sizes of ANSI 150 lb. flanged ball valves shall be pressure-rated for 150 PSI at 70°F non-shock. All PVC and CPVC valves to be NSF/ANSI 61 and NSF/ANSI 372 Listed. All Vented Thermoplastic True Union Ball Valves shall carry a three-year global warranty, shall be manufactured by Hayward® Flow Control and in the USA.