Product Resources
Product Guide :
Data Sheets :
IOMs :
HR8N4C 7080 in/lbs 480 On/Off NEMA/4/4X/IP68 Standard/Chassis/2AX
Product Description
Hayward’s HRS Series electric actuators are designed and produced to provide years of service in demanding industrial environments such as chemical processing, waste and water treatment, power generation, oil & gas, marine, mining and building services. These quarter-turn units drive dampers, ball valves, butterfly valves or inlet guide vanes that require torque ranges from 300 lbf-in up through 177,000 lbf-in. The HR Series housings are designed to meet NEMA 4X environmental demands, with ISO5211 compliant mounting that readily mounts up to most valves in the industries served. Featuring an epicyclic transmission system, the HRS Series provides highly efficient multiplication of motor power to produce uniquely compact torque ranges compared to other technologies. A clutch-free manual override system provides full-time override capabilities during powered or un-powered events, and allows for simple adaptation for overhead chain-wheel drive installations.Actuator Type
Electric
Voltage
480VAC 3-Phase
Torque Rating
7080 in/lbs
Control
On/Off
Chassis
HR8N4C
Power Type
3 Phase
Chassis Option
Standard Chassis with (2) Aux Switches
Cycle Speed Sec 60hz Dc
39 sec
Duty Cycle
0.25
Start Current
0.7 amps
Run Current
0.4 amps
Lra Current
1 amps
Motor Watts
90W
Wiring Diagram Filename
WD43TS-3PH
Chassis Description
HRSN4A~4D Series On/Off & Proportional Electric Actuators
• Extended Product Range from 300 in-lb to 177,000 in-lb
• Powder Coated Aluminum Alloy Housing
• ISO5211 Compliant Mounting with Double Square Drive Socket
• On/Off or Proportional Control (2-10 vdc / 4-20mA Inputs & Outputs)
• NEMA 4/4X/IP67 Environmental Rating
• Multiple AC and DC Voltages
• Integrated Local Control Stations
• Visual Position Indicators
• CSA Certified to CSA 22.2 No. 139-10 UL439 for Ordinary Location Applications
• Backed by Hayward’s Exclusive 3 Year Warranty
• Interchangeable ISO5211 Mounting and Drive Shafts
• Positioners
• Extended Duty Motors
• 3 Position Control
• Passive Analog Feedback
• Torque Switches
• 3 Phase Motor Control Center
• IP68 Submersible Rating
• Powder Coated Aluminum Alloy Housing
• ISO5211 Compliant Mounting with Double Square Drive Socket
• On/Off or Proportional Control (2-10 vdc / 4-20mA Inputs & Outputs)
• NEMA 4/4X/IP67 Environmental Rating
• Multiple AC and DC Voltages
• Integrated Local Control Stations
• Visual Position Indicators
• CSA Certified to CSA 22.2 No. 139-10 UL439 for Ordinary Location Applications
• Backed by Hayward’s Exclusive 3 Year Warranty
• Interchangeable ISO5211 Mounting and Drive Shafts
• Positioners
• Extended Duty Motors
• 3 Position Control
• Passive Analog Feedback
• Torque Switches
• 3 Phase Motor Control Center
• IP68 Submersible Rating