HRS Series On/Off Proportional Electric Fail-Safe Actuators
Dev logs
All Files
Array
(
[0] => HRSN2_Battery_Supercapacitor_Backup_IOM_EN:akeneo_connector/asset_files/H/R/HRSN2_Battery_Supercapacitor_Backup_IOM_EN_7d12.pdf
[1] => HRSN2_Battery_Supercapacitor_Backup_DataSheet_EN:akeneo_connector/asset_files/H/R/HRSN2_Battery_Supercapacitor_Backup_DataSheet_EN_c907.pdf
)
Electrodes
Array
(
)
Electrodes Tabs
Array
(
)
Datasheet
Array
(
[0] => Array
(
[0] => HRSN3_Battery_Backup_DataSheet_EN
[1] => akeneo_connector/asset_files/H/R/HRSN3_Battery_Backup_DataSheet_EN_5056.pdf
)
[1] => Array
(
[0] => HRSN4A_4D_Battery_Backup_DataSheet_EN
[1] => akeneo_connector/asset_files/H/R/HRSN4A_4D_Battery_Backup_DataSheet_EN_e3a5.pdf
)
[2] => Array
(
[0] => HRSN2_Battery_Supercapacitor_Backup_DataSheet_EN
[1] => akeneo_connector/asset_files/H/R/HRSN2_Battery_Supercapacitor_Backup_DataSheet_EN_c907.pdf
)
)
Brochures tab
Array
(
[0] => Array
(
[0] => Hayward_Comprehensive_Actuation_Guide_ProductGuide_EN
[1] => akeneo_connector/asset_files/H/a/Hayward_Comprehensive_Actuation_Guide_ProductGuide_EN_9c73.pdf
)
[1] => Array
(
[0] => HRSN3_Battery_Backup_DataSheet_EN
[1] => akeneo_connector/asset_files/H/R/HRSN3_Battery_Backup_DataSheet_EN_5056.pdf
)
[2] => Array
(
[0] => HRSN4A_4D_Battery_Backup_DataSheet_EN
[1] => akeneo_connector/asset_files/H/R/HRSN4A_4D_Battery_Backup_DataSheet_EN_e3a5.pdf
)
[3] => Array
(
[0] => HRSN2_Battery_Supercapacitor_Backup_DataSheet_EN
[1] => akeneo_connector/asset_files/H/R/HRSN2_Battery_Supercapacitor_Backup_DataSheet_EN_c907.pdf
)
)
0
Array
(
[Description] => Array
(
[0] => Hayward’s HRS Series Battery Backup electric actuators are designed and produced to provide years of service in demanding industrial environments such as chemical processing, waste and water treatment, power generation, oil & gas, marine, mining, and building services. The integral battery backup system manages battery charge/discharge cycles to provide safe and reliable reserve power in the event of mains power failure. These quarter-turn units drive dampers, ball valves, butterfly valves or inlet guide vanes that require torque ranges from 300 in-lbs up to 177,000 in-lbs. The HR Series housings are designed to meet NEMA 4X environmental demands, with ISO5211 compliant mounting that readily attaches to most valves in the industries served. The HRS2 Series is a compact multi-stage gear train with a lever-less manual override system built in. The HRS3+ Series features an epicyclic transmission system that provides highly efficient multiplication of motor power to produce uniquely compact torque ranges compared to other technologies. A clutch-free manual override system provides full-time override capabilities during powered or un-powered events.
)
[Features] => Array
(
[0] => • Stored Energy System provides positive valve positioning upon loss of mains power
• Up to 8850”lbs torque for butterfly valves up to 14”
• 24VAC/VDC operation standard, with 120vac and 230vac transformer options available
• Field selectable fail CW or CCW operation for complete flexibility
• Self-Contained charge and discharge control of the Lithium-Ion Battery or Supercapacitor bank provides maximum life from the reserve energy system
• Battery Pack and Supercapacitor bank are field replaceable to minimize down-time
• Stored Energy status indicators show system health
• Fault-Out contact is standard and allows remote monitoring of the stored energy system performance.
• ISO5211 Mechanical mount w/ double-square female drive socket
• Two (2) 1/2” or 3/4” EMT ports for ease of field wiring• NEMA 4/4x/IP67 Compliant
)
[Brochures] => Array
(
[0] => Array
(
[0] => Hayward_Comprehensive_Actuation_Guide_ProductGuide_EN
[1] => akeneo_connector/asset_files/H/a/Hayward_Comprehensive_Actuation_Guide_ProductGuide_EN_9c73.pdf
)
[1] => Array
(
[0] => HRSN3_Battery_Backup_DataSheet_EN
[1] => akeneo_connector/asset_files/H/R/HRSN3_Battery_Backup_DataSheet_EN_5056.pdf
)
[2] => Array
(
[0] => HRSN4A_4D_Battery_Backup_DataSheet_EN
[1] => akeneo_connector/asset_files/H/R/HRSN4A_4D_Battery_Backup_DataSheet_EN_e3a5.pdf
)
[3] => Array
(
[0] => HRSN2_Battery_Supercapacitor_Backup_DataSheet_EN
[1] => akeneo_connector/asset_files/H/R/HRSN2_Battery_Supercapacitor_Backup_DataSheet_EN_c907.pdf
)
)
[Manuals] => Array
(
[0] => Array
(
[0] => HRSN3_Battery_Backup_IOM_EN
[1] => akeneo_connector/asset_files/H/R/HRSN3_Battery_Backup_IOM_EN_b084.pdf
)
[1] => Array
(
[0] => HRSN4A_4D_Battery_Backup_IOM_EN
[1] => akeneo_connector/asset_files/H/R/HRSN4A_4D_Battery_Backup_IOM_EN_6a3c.pdf
)
[2] => Array
(
[0] => HRSN2_Battery_Supercapacitor_Backup_IOM_EN
[1] => akeneo_connector/asset_files/H/R/HRSN2_Battery_Supercapacitor_Backup_IOM_EN_7d12.pdf
)
)
[Parts] =>
[Accessories] =>
[Applications] => Array
(
)
[Analytical Electrodes] => Array
(
)
)
Analytical Electrodes
Array
(
[Description] => Array
(
[0] => Hayward’s HRS Series Battery Backup electric actuators are designed and produced to provide years of service in demanding industrial environments such as chemical processing, waste and water treatment, power generation, oil & gas, marine, mining, and building services. The integral battery backup system manages battery charge/discharge cycles to provide safe and reliable reserve power in the event of mains power failure. These quarter-turn units drive dampers, ball valves, butterfly valves or inlet guide vanes that require torque ranges from 300 in-lbs up to 177,000 in-lbs. The HR Series housings are designed to meet NEMA 4X environmental demands, with ISO5211 compliant mounting that readily attaches to most valves in the industries served. The HRS2 Series is a compact multi-stage gear train with a lever-less manual override system built in. The HRS3+ Series features an epicyclic transmission system that provides highly efficient multiplication of motor power to produce uniquely compact torque ranges compared to other technologies. A clutch-free manual override system provides full-time override capabilities during powered or un-powered events.
)
[Features] => Array
(
[0] => • Stored Energy System provides positive valve positioning upon loss of mains power
• Up to 8850”lbs torque for butterfly valves up to 14”
• 24VAC/VDC operation standard, with 120vac and 230vac transformer options available
• Field selectable fail CW or CCW operation for complete flexibility
• Self-Contained charge and discharge control of the Lithium-Ion Battery or Supercapacitor bank provides maximum life from the reserve energy system
• Battery Pack and Supercapacitor bank are field replaceable to minimize down-time
• Stored Energy status indicators show system health
• Fault-Out contact is standard and allows remote monitoring of the stored energy system performance.
• ISO5211 Mechanical mount w/ double-square female drive socket
• Two (2) 1/2” or 3/4” EMT ports for ease of field wiring• NEMA 4/4x/IP67 Compliant
)
[Brochures] => Array
(
[0] => Array
(
[0] => Hayward_Comprehensive_Actuation_Guide_ProductGuide_EN
[1] => akeneo_connector/asset_files/H/a/Hayward_Comprehensive_Actuation_Guide_ProductGuide_EN_9c73.pdf
)
[1] => Array
(
[0] => HRSN3_Battery_Backup_DataSheet_EN
[1] => akeneo_connector/asset_files/H/R/HRSN3_Battery_Backup_DataSheet_EN_5056.pdf
)
[2] => Array
(
[0] => HRSN4A_4D_Battery_Backup_DataSheet_EN
[1] => akeneo_connector/asset_files/H/R/HRSN4A_4D_Battery_Backup_DataSheet_EN_e3a5.pdf
)
[3] => Array
(
[0] => HRSN2_Battery_Supercapacitor_Backup_DataSheet_EN
[1] => akeneo_connector/asset_files/H/R/HRSN2_Battery_Supercapacitor_Backup_DataSheet_EN_c907.pdf
)
)
[Manuals] => Array
(
[0] => Array
(
[0] => HRSN3_Battery_Backup_IOM_EN
[1] => akeneo_connector/asset_files/H/R/HRSN3_Battery_Backup_IOM_EN_b084.pdf
)
[1] => Array
(
[0] => HRSN4A_4D_Battery_Backup_IOM_EN
[1] => akeneo_connector/asset_files/H/R/HRSN4A_4D_Battery_Backup_IOM_EN_6a3c.pdf
)
[2] => Array
(
[0] => HRSN2_Battery_Supercapacitor_Backup_IOM_EN
[1] => akeneo_connector/asset_files/H/R/HRSN2_Battery_Supercapacitor_Backup_IOM_EN_7d12.pdf
)
)
[Parts] =>
[Accessories] =>
[Applications] => Array
(
)
[Analytical Electrodes] => Array
(
)
)
Array
(
)
Hayward’s HRS Series Battery Backup electric actuators are designed and produced to provide years of service in demanding industrial environments such as chemical processing, waste and water treatment, power generation, oil & gas, marine, mining, and building services. The integral battery backup system manages battery charge/discharge cycles to provide safe and reliable reserve power in the event of mains power failure. These quarter-turn units drive dampers, ball valves, butterfly valves or inlet guide vanes that require torque ranges from 300 in-lbs up to 177,000 in-lbs. The HR Series housings are designed to meet NEMA 4X environmental demands, with ISO5211 compliant mounting that readily attaches to most valves in the industries served. The HRS2 Series is a compact multi-stage gear train with a lever-less manual override system built in. The HRS3+ Series features an epicyclic transmission system that provides highly efficient multiplication of motor power to produce uniquely compact torque ranges compared to other technologies. A clutch-free manual override system provides full-time override capabilities during powered or un-powered events.
Key Features and Benefits
• Stored Energy System provides positive valve positioning upon loss of mains power
• Up to 8850”lbs torque for butterfly valves up to 14”
• 24VAC/VDC operation standard, with 120vac and 230vac transformer options available
• Field selectable fail CW or CCW operation for complete flexibility
• Self-Contained charge and discharge control of the Lithium-Ion Battery or Supercapacitor bank provides maximum life from the reserve energy system
• Battery Pack and Supercapacitor bank are field replaceable to minimize down-time
• Stored Energy status indicators show system health
• Fault-Out contact is standard and allows remote monitoring of the stored energy system performance.
• ISO5211 Mechanical mount w/ double-square female drive socket
• Two (2) 1/2” or 3/4” EMT ports for ease of field wiring
• NEMA 4/4x/IP67 Compliant
• Up to 8850”lbs torque for butterfly valves up to 14”
• 24VAC/VDC operation standard, with 120vac and 230vac transformer options available
• Field selectable fail CW or CCW operation for complete flexibility
• Self-Contained charge and discharge control of the Lithium-Ion Battery or Supercapacitor bank provides maximum life from the reserve energy system
• Battery Pack and Supercapacitor bank are field replaceable to minimize down-time
• Stored Energy status indicators show system health
• Fault-Out contact is standard and allows remote monitoring of the stored energy system performance.
• ISO5211 Mechanical mount w/ double-square female drive socket
• Two (2) 1/2” or 3/4” EMT ports for ease of field wiring
• NEMA 4/4x/IP67 Compliant